iPad Repair Dubai

iPad batteries wear out, and the signs are easy to spot once you know them: the charge drops far faster than it used to, the iPad shuts down even though it shows charge remaining, it only works while plugged in, or, in the more serious case, the screen or back begins to lift because the battery has physically swollen. A swelling battery is not something to ignore, the pressure can crack the screen and, in rare cases, becomes a safety risk, so it’s worth acting on early.

Replacing an iPad battery is a careful job. The battery is glued firmly to the inside of the chassis, so it has to be released safely without bending the frame or puncturing the cell, and a swollen battery has to be handled with particular care. We use the correct removal technique, fit a fresh genuine-grade battery rated to the original capacity, reseal everything properly, and then test charging behaviour and battery health before returning it. A good battery replacement brings an older iPad that still does everything you need right back to all-day life, often for a fraction of the price of a new device.

Liquid and iPads don’t mix, and the damage isn’t always immediate. Water, juice, coffee or seawater leaves residue on the logic board that keeps corroding the circuitry for days, which is why an iPad that seemed fine after a spill can fail a week later. If your iPad has taken liquid, the most important things are to stop using it, do not try to charge it, and bring it in quickly, the sooner we treat it, the more we can usually save.

Our liquid-damage process is board-level, not guesswork. We open the iPad, assess the spread of corrosion, clean the board thoroughly, including ultrasonic cleaning where it’s needed, and trace and repair the specific components the liquid attacked. We’re always honest about the reality: corrosion damage can never be guaranteed, because the harm depends on what was spilt, where it reached and how long it sat. But our success rate on liquid-damaged iPads is high, and even where a board can’t be fully revived we can very often recover your photos and data first.

The back and frame of an iPad take a lot of punishment. A drop can bend the aluminium chassis, crack the rear glass on cellular models, which have a glass strip for the antenna, or dent a corner badly enough that the screen no longer seats flat, which then causes touch problems or lets dust in. A bent frame also puts ongoing stress on the screen and battery, so it’s worth straightening or replacing rather than living with.

We assess the housing, reshape or replace it as needed, and make sure the screen and internal parts sit correctly afterwards so the repair lasts. Where the rear glass or antenna line is cracked, we explain whether it’s cosmetic or affecting function so you can decide what’s worth doing.

Sticky, unresponsive or rattling buttons are a common annoyance: a home button that needs several presses, a power button that won’t wake or sleep the iPad reliably, or volume buttons that have stopped responding. We repair and replace these so they click cleanly again.

There is one honest caveat we always explain on older iPads with a physical home button. That home button contains the Touch ID sensor, and Apple pairs it to the logic board at the factory. If the original button is damaged beyond repair, a replacement can restore the button’s clicking and home function, but Touch ID fingerprint unlock usually cannot be transferred to a new button, because only Apple can re-pair it. We’ll always tell you this up front so you can decide, rather than discovering it afterwards.

Face ID and Touch ID problems range from “Face ID is not available” messages to a fingerprint sensor that no longer responds. Some causes are repairable, such as damaged flex cables or a knocked TrueDepth camera, and some are tied to Apple’s factory pairing, which we’re always straight about. We diagnose exactly what’s failed, tell you honestly whether it can be restored, and never charge you for a repair that can’t deliver the result you’re after.

iPad Pro repair

The iPad Pro is the most advanced and most expensive iPad, with a laminated edge-to-edge display, ProMotion 120Hz on most models, Face ID, and, on recent generations, M-series chips with USB-C and Thunderbolt. That sophistication makes its repairs more involved: the screen is a single bonded assembly that needs controlled heat and careful handling, the Face ID array has to be preserved, and board-level faults demand genuine chip-level skill. Because a new iPad Pro costs several thousand dirhams, repairing yours, whether it’s a cracked ProMotion screen, a swollen battery or a liquid-damaged board, is almost always far better value than replacing it. We keep the parts and tools for every iPad Pro generation, both 11-inch and 12.9 or 13-inch, from the early A10X and A12X models through to the latest M4.

iPad Air repair

The iPad Air sits between the standard iPad and the Pro, and from the 2020 fourth generation onward it adopted the laminated full-screen design and powerful chips, A14, then M1, M2, M3 and now M4, that make it feel close to a Pro. In practice that means its screen repairs behave more like the Pro’s than the basic iPad’s, with a fully bonded display that demands proper technique rather than a quick glass swap. The iPad Air repairs we handle most are cracked laminated screens, battery replacement, USB-C charging-port faults and liquid damage. We repair every iPad Air generation, including the newer 11-inch and 13-inch models, with parts matched to your exact device.

iPad mini repair

The iPad mini packs a full iPad into a compact body, which makes its repairs genuinely fiddly and best left to experienced hands. Its small laminated screen, tightly packed internals and, on the sixth-generation and A17 Pro models, slim USB-C design leave very little margin for error during disassembly. We regularly repair iPad mini cracked screens, worn batteries, charging-port faults and the touch issues owners ask about, and we cover every generation from the fifth-generation A12 model through to the latest A17 Pro mini. The size makes a steady, methodical repair all the more important.

Standard iPad repair

The standard iPad is the most popular and most affordable model, widely used by students, families and businesses across Dubai, so we repair a great many of them. On most standard iPads the screen is two separate layers, the glass and digitiser over a separate LCD, rather than fully laminated, which can make a cracked-glass repair more affordable than on the Air or Pro. Typical repairs include cracked screens, tired batteries, charging-port wear from constant daily use, and the knocks and spills that come with heavy everyday and classroom life. We cover every generation from the fifth through to the eleventh.

It’s worth bringing your iPad in if you notice any of these: a cracked or shattered screen, areas of the screen that don’t respond or that tap themselves, lines, flickering or discoloured patches on the display, a battery that drains unusually fast or shows under 80% health, a screen or back that is lifting or bulging, an iPad that won’t charge or only charges at an angle, no sound or a microphone that isn’t picked up, a blurry or dead camera, an iPad that won’t turn on or is stuck on the Apple logo, or anything following a drop or a spill. Catching these early usually means a simpler, cheaper repair, and our diagnostic to identify the cause is free.

iPad repair prices depend mainly on the model and the part, a screen for a standard iPad costs far less than a laminated iPad Pro display, for example. The table below gives realistic starting points, and your exact price is confirmed after the free diagnostic, with no obligation to proceed. There are no hidden charges: the price we quote is the price you pay, and if we can’t fix the fault, you don’t pay for the attempt.

• We repair the board at component level, not just swap it. On the M1, M1 Pro and M1 Max, a single failed component is usually the whole fault. Repairing that part is cheaper than a board swap and keeps your storage and data intact.
• Free, honest diagnosis and a fixed price first. You see the real fault and the real cost before any work. No fix, no fee.
• Genuine or OEM-grade parts, fitted and tested. That matters more on these models, where the mini-LED display and large batteries are expensive to get wrong.
• Work done by Dan's bench. Power-rail diagnosis and micro-soldering on Apple Silicon by one of Dubai's more experienced technicians, with 380+ reviews behind the shop.
• Your data comes first. These are pro machines, and we treat the data on them as the priority on every board and liquid job.
• Free pickup and delivery across Dubai, secure courier to the rest of the UAE, and a 3-month warranty on the repair.